Tag: heating

8 Signs It’s Time to Replace Your Furnace

It’s important to schedule regular furnace maintenance to make sure your system is functioning efficiently, but how can you tell that it’s time to replace the whole system? Learn more about the signs that you need more than just a furnace repair, and contact Max Comfort Heating & Cooling to schedule a new furnace installation in Oshawa or Durham Region.

Your Furnace Is Old

Your furnace has a limited lifespan. Some furnaces need to be replaced after 10 years, while others run strong for 15 to 20 years. The older your furnace is, the more issues it’s likely to have. And while regular furnace maintenance can improve the lifespan of your system, it will need to be replaced someday.

Look at the owner’s manual to find out how old your system is and contact an HVAC company for information about newer systems and to schedule a furnace installation.

You Have Higher Energy Bills

While a rise in energy bills could be a sign that you’re in need of furnace repair, continual issues and high utility bills are a sign that your system just isn’t going to improve. There’s only so much a technician can do to make an old system run more efficiently, and it’ll be more cost-effective in the long run to replace your system.

Humidity Issues

The air is dry enough in the winter — you don’t need your furnace to dry it out even more. A lack of humidity in your home can cause property damage after extended periods of time, so replace your furnace to avoid even more repairs. Another option is to install a humidifier with your existing furnace to resolve this issue.

Uneven Heating

As your furnace gets older, it has a more difficult time pushing air evenly throughout your home. If you notice rooms in your home aren’t as warm — or downright cold — your furnace may not be strong enough to heat all of your home anymore. Consider getting it replaced so you can relax comfortably in every area of your home.

It’s Increasingly Noisy

Noise in your furnace can be caused by components that have gone bad and just need to be replaced, but if you’re consistently hearing strange noises from your system, it could be a structural issue that only a replacement can fix.

Damage Is Visible

Speaking of structural issues, if you notice visible damage to your furnace, it’s time to replace it. Your furnace ages naturally over time and will develop cracks and rust after many years of use. When this happens, there’s no better fix than a new furnace installation.

You’re Scheduling Furnace Repairs Often

Don’t get us wrong — we love having loyal customers, but if you’re having to schedule furnace repairs with us several times over a one- or two-year period, it would be more cost-effective for you to replace your system. Contact Max Comfort Heating & Cooling today for more information about a new furnace and schedule your furnace installation with us!

10 Signs You Need to Schedule a Furnace Repair

When the cold weather rolls in, you rely on your furnace to keep you and your family warm and comfortable until spring. And while a furnace that doesn’t work at all is obviously a problem, your furnace could have issues that you may not realize are signs that you need to schedule furnace repair.

Keep an eye out for these 10 signs your furnace needs some TLC, and contact Max Comfort Heating & Cooling to schedule furnace repair if you live in Oshawa or Durham Region.

You Haven’t Had It Serviced Regularly

Your furnace may appear to be working just fine, but there could be some unseen issues that will cause major problems down the road. If it’s been awhile since you’ve scheduled furnace maintenance, it’s time to have it inspected and serviced.

Water Is Pooling Around the Furnace

A clogged condensation line can cause a water leak around your furnace. This will prevent your furnace from heating your home as efficiently as it should. If you notice that water is pooling around the unit, schedule a furnace repair with a professional right away.

You Smell Gas

Another substance that your furnace can leak is gas. If you notice the smell of gas while your furnace is running leave your house immediately and call your local utility provider or fire department from outside the home as static electricity could be extremely hazardous if a gas leak is present.

Gas is highly flammable and a leak needs to be addressed right away. Contact Max Comfort Heating & Cooling to schedule an emergency furnace repair if the furnace is the cause of the gas leak.

You Hear Strange Noises

You should be able to hear when your furnace turns on, but if you hear strange noises accompanying your system whirring to life, there could be a component that’s malfunctioning. If you hear pops, squeaks, scraping, thumping, or banging, something isn’t working correctly.

It’s easiest to have a trained HVAC professional troubleshoot these noises, so schedule a furnace repair to have the problem checked out.

The Airflow Is Weak

There are a variety of reasons that the airflow from your furnace could weaken, but none of them are good. It could be something as simple as a fan or filter issue, but it could also be a problem with the belt or motor. Schedule a furnace repair to get it taken care of right away.

The Furnace Blows Cold Air

Your furnace is supposed to keep you warm, not cool. Schedule an appointment with a professional to evaluate your system.

The Thermostat Doesn’t Work

If you keep having to turn the temperature up on your thermostat, there’s probably something wrong with it. When your thermostat malfunctions, it’s likely an electrical issue that an HVAC professional needs to address. They will look for things like loose wiring, a blown fuse, and tripped circuit breakers.

Your Energy Bill Has Risen Significantly

When your furnace has to work harder to do its job, it uses more energy. This will cause a spike in your energy bill. There are a lot of potential culprits when your furnace is using more energy than usual, so hiring a trained technician is your best bet to have the problem fixed.

The Furnace Keeps Cycling

A furnace that’s constantly turning on and off again could be caused by a variety of issues. A clogged filter, poor air circulation, or a faulty thermostat can cause this cycling. Schedule a furnace repair to find out what’s causing the problem.

The System Is Old

The older your furnace is, the more problems you’re likely to experience with it. Furnace repair is one option, but it may be in your best interest to replace the whole system. Contact Max Comfort Heating & Cooling for all of your furnace repair, maintenance, and installation needs to stay warm this winter.

How to Prepare Your Furnace for Winter

Winter is just around the corner, which means that your furnace is about to become your best friend. Before you turn your system on, though, there are several things you can do to make sure your furnace is ready to work all winter long. 

Click here to learn more about why it’s important to prepare your furnace for winter, and continue reading for more information on how to maintain your system. For professional and experienced service, contact Max Comfort Heating & Cooling for furnace maintenance and furnace repair.

Turn on the Thermostat

Check to make sure your heating system is working by switching your thermostat from cooling to heating. Adjust the temperature by raising it a few degrees. You should hear the furnace kick on when you raise the temperature on the thermostat. 

If you don’t hear your furnace turn on, there could be a couple of different issues. First, take the cover off of the thermostat and make sure all the wires are secure and connected. Next, check to see that the furnace unit itself is turned on. There could also be an issue with the fan, blower, or heat pump. If you’re unable to get your system running, contact Max Comfort Heating & Cooling to schedule furnace repair and maintenance.

Change Air Filters

Changing the air filters on your furnace every few months prevents particles from building up in the system and can help extend the lifespan of your furnace. Depending on the type of furnace you use, you will find air filters in different spots around your home. The air filter for the furnace is always located next to the furnace in a filter cabinet. Swap out the single filter in your HVAC unit. 

Some furnace systems use permanent filters, which you can clean and reuse. If you don’t feel confident doing this yourself, you can schedule furnace maintenance with your local HVAC company.

Cover the Condenser

Protect your HVAC system by covering up the AC condenser for the winter. You can cover the condenser with a plastic lid or a large piece of wood or an AC cover, but don’t cover the system with a tarp. Plastic tarps trap moisture, which can damage your AC.

Note: If your system uses a heat pump, you don’t need to cover the condenser because this type of system works year-round.

Clean the Heat Exchanger

This step requires a trained professional to be completed properly. The heat exchange needs to be brushed out and vacuumed once a year. During this cleaning process, your technician should also check for cracks in the system. These cracks could cause a carbon monoxide leak in your home and need to be fixed immediately. A trained technician knows how to spot issues like this, so contact a trusted HVAC company to schedule your furnace maintenance.

Test the Igniter

If you’re having issues getting your furnace to work, it could be that the pilot light has gone out. If you have an older system, you will need to relight the pilot. If you have a newer furnace, your pilot light works electronically and you just need to reset the system. If this doesn’t work, check the breaker that’s connected to your furnace. 

If you’re continuing to have issues getting the igniter to work, you will need to contact an HVAC professional to schedule furnace repair.

Inspect Carbon Monoxide Detectors

One of the hazards that furnaces present is a carbon monoxide leak. For this reason, you should check your carbon monoxide detectors while you’re performing furnace maintenance. Check these detectors regularly and, if you have a chimney, inspect it for carbon buildup and small animals. 

Schedule Maintenance & Repairs

When winter hits Oshawa and Durham Region, you have enough to worry about without being concerned about whether or not your furnace is working properly. To make sure it’s ready for the colder weather, contact Max Comfort Heating & Cooling to schedule furnace maintenance, and get in touch right away if you’re in need of emergency furnace repair.

4 Reasons You Should Have Your Furnace Serviced Before Winter

We’re already starting to experience cooler weather in Oshawa and Durham Region, which means that it’s time to schedule an appointment for furnace maintenance. While you may be tempted to just wait until you actually need to use your furnace, you run the risk of being without heat if your system has a problem.

At Max Comfort Heating & Cooling, we offer furnace maintenance, furnace installation, and furnace repair to make sure you’re prepared for the worst of winter weather. Learn more about how your furnace could benefit from regular maintenance, and contact us right away if you’re in need of emergency furnace repair.

We’re already starting to experience cooler weather in Oshawa and Durham Region, which means that it’s time to schedule an appointment for furnace maintenance. While you may be tempted to just wait until you actually need to use your furnace, you run the risk of being without heat if your system has a problem.

At Max Comfort Heating & Cooling, we offer furnace maintenance, furnace installation, and furnace repair to make sure you’re prepared for the worst of winter weather. Learn more about how your furnace could benefit from regular maintenance, and contact us right away if you’re in need of emergency furnace repair.

Lower Costs

If you’re already worried about how much it’s going to cost to keep your home warm this winter, you might be hesitant to spend money on furnace maintenance on top of that. However, having your furnace inspected and serviced can actually decrease your monthly energy bill.

This is because a furnace technician will perform any tune-ups necessary so that your system is working at it’s best. A faster and better system won’t need to work as hard to keep you and your family warm, which means less energy used in the long run. 

Longer Lifespan of Furnace

A maintained furnace not only works better in the winter, but can last longer overall because minor issues don’t progress into major system problems. By scheduling furnace maintenance before winter, you can make sure your system is running in top shape and is prepared for many winters to come.

Of course, all furnaces eventually need to be replaced. The average lifespan of a furnace is about 10 years, so if your system is on its way out, it’s worth investing in a new one rather than continuing to repair the one you have. At Max Comfort Heating & Cooling, we offer furnace installation to make sure you have the best heating system that works at its highest capacity from the start. Contact us today if you’re interested in purchasing or renting a furnace.

Less Risk to Break Down

Your furnace is likely to break down because of two main culprits: bad components and poor airflow. When you schedule furnace maintenance, however, your system will be inspected for these potential issues. Your technician can replace any poor components and make adjustments to airflow to ensure that your furnace can work all through winter to keep you comfortable and warm.

If your system does break down, Max Comfort Heating & Cooling is here to help. On top of regular furnace maintenance, we offer emergency furnace repair in the event that you’re left without heat. We know how dangerous it can be to go without heat during the coldest months of the season, which is why we provide furnace repair to Oshawa and Durham Region as soon as you need it. We offer 24/7 furnace repair service for all makes and models of furnaces so you don’t have to worry about finding an HVAC company that can service your specific brand.

Don’t wait until the first chilly day to check that your furnace is working — contact Max Comfort Heating & Cooling today to schedule your appointment for furnace maintenance.